It’s no surprise that noisy garage doors can be a lot of hassle. It doesn’t take long at all for the unpleasant assortment of noises they make – think squeaking, crunching, or grinding – to get an anybody’s nerves, but even with this being the case, many people don’t do much about it. While the noise itself is annoying, it can also be a sign of a need for maintenance, which makes paying attention to these noises all the more important. In this article, we take a look at a few ways you can get your noisy garage door sounding better than ever.
Where to get started with noisy garage doors
If you’re fed up with noisy garage roller doors in Melbourne, you’re certainly not the only one. In fact, you’ve probably heard a lot of noisy doors in your neighbourhood, particularly if you live or work in commercial areas. Getting the crux of the problem is important, as these noises are usually an indication of a garage door that is having a bad time. Thankfully, a little bit of attention can help to lengthen the life of your door considerably – but where should you start? Although these doors often involve complex mechanisms and quite a few moving parts, it doesn’t mean that the problem itself is complex. It may actually be something small causing the noise – many noises are actually just the result of excess vibration. This vibration usually indicates that a part in the mechanism is loose, worn, or needs some more lubrication. Much of this is a time thing, where parts become worn down as the doors are constantly used, which means that for the most part it’s a simple and quick fix. For starters, recognising if the track of your door is bent or blocked should demonstrate that the noise is related to the door moving awkwardly on the tracks, but it’s also possible for an unbalanced door to place excess pressure on the tracks which will usually create a creaking noise.
Some simple DIY solutions
If you’re planning on assessing your garage door yourself, first make sure that the garage area is sufficiently well-lit and the door is disconnected from power. The best place to start is taking a look at whether small rocks or similar debris blocking the tracks. If they’re all clear, lubrication might be the answer – use a garage door lubricant to grease all the moving parts including hinges, chains, and rollers and tighten any loose nuts and bolts as you go. If you’re confident enough to replace loose rollers you find yourself, great! Otherwise, you’ll need to get in touch with a professional to help you out. You should also be checking the balance of the door by leaving it half open – if you can see that the door is leaning, it will require rebalancing. Last but not least, check that the rubber strip on the bottom of the door isn’t too worn, as this will make the door crash into the ground when it descends.
Have any garage door noises that you’re concerned about?
It’s important to remember that you check out any sources of excessive noise that emanate from a garage door before it’s too late, otherwise you might very quickly be dealing with the expense of a broken door. Even if you don’t feel like fronting the expense for a door fix, just remember that the cost for a fix is much less than the cost of a brand new door. With this in mind, making sure you catch any noises before they can cause significant damage is important, so make sure you don’t keep putting it off, even if you’re convinced that it’s something small!